Flash Samsung Galaxy A7 (2018) SM-A750FN

Romphe.com - This is a continuation of the previous article already discussed about the firmware Samsung Galaxy A7. And in this article I will try to describe how to Flash Samsung Galaxy A7 SM-A750FN English. Read Also : Firmware Flash Samsung Galaxy A7 (2018) SM-A750GN

Samsung Galaxy A7 (2018) SM-A750FN
Samsung Galaxy A7 (2018) SM-A750FN

This article will give you a guide to how to solve Samsung A7 2018 Bootloop, Hang Logo, Full Memory, Forgotten Patterns and other software problems. What should be noted is that please read this article carefully and do not miss a single paragraph for maximum results.

I'd better tell you from here is not sure you can do this please leave it to the expert, take phone to the Hp serviceman in the area near house.

Because flashing failure can indeed cause hp only stuck in the logo or even Samsung galaxy a7 2018 hp completely dead. And all the risks that come from following these guidelines are entirely your own responsibility.

For that back I emphasize if it is not sure can, please take it to the serviceman!

Okay if you understand let's go to the tutorial.

How to Flash Samsung Galaxy A7 SM-A750FN (2018) Tested

Before flashing please backup your data first if possible. Because after flashing is completed all existing data in internal memory will be lost automatically replaced with a new file system. Read Also : Unduh Firmware Flash Samsung Galaxy A42 5G SM-A426B

Flashing Materials

  • PC/laptop
  • USB cable
  • Tool Odin
  • Samsung USB Driver
  • Stock firmware Samsung Galaxy A7 SM-A750FN

Samsung Galaxy A7 Flashing Tutorial 2018

1. Please do charging Samsung smartphones until the battery is above 50%. Then please disable the smartphone first by pressing Power until it is completely off.

2. Well now, extract all the ingredients that has just downloaded and will get 5 official files. Please start installing SAMSUNG driver on PC. Skip this if it's been done before.

3. Open the Odin Tool. Restart your smartphone by pressing both buttons, Vol (-) and Vol (+) and connect to your PC using a USB cable. If there is a better use of the original USB cable built in hp.

4. You will see that Odin will detect device with a blue box and appear with the COM port number.

5. Then, just add each file to Odin according to the column name BL, AP, CP, CSC. Use CSC files if you want to flash clean or HOME CSC if you want to save your apps and data.

6. Make sure not to check the additional box and that must be selected are F Reset Time and Auto-Reboot. Click the Start button, and wait for Odin to flash until a PASS appears in the green box.

7. After the flash is complete, smartphone will reboot, and can disconnect the device from the PC.

8. Until this stage the flashing process is complete. Please complete the hp settings as when the first time the phone was purchased. Like choosing a language and others.

How very easy is not how flash Samsung Galaxy A7 SM-A750FN (2018) Tested. So many articles today, hopefully there are knowledge and benefits that get from this article. Read Also : Flashing Firmware Samsung Galaxy S20+ SM-G986U

0 Response to "Flash Samsung Galaxy A7 (2018) SM-A750FN"

Post a Comment

NO Link Spam

Iklan Atas Artikel

Iklan Tengah Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel