Firmware Flash Samsung Galaxy A7 (2018) SM-A750GN

Romphe.com - How to Flash Samsung Galaxy A7 (2018) SM-A750GN Tested This is a continuation of the previous article already discussed about the firmware Samsung Galaxy A7. And in this article I will try to describe how to Flash Samsung Galaxy A7 SM-A750GN Bahasa Indonesia. Read Also : Flashing Firmware Samsung Galaxy S20+ SM-G986U

Firmware Flash Samsung Galaxy A7 (2018) SM-A750GN
Samsung Galaxy A7 (2018) SM-A750GN

This article will give you a guide to how to solve Samsung A7 2018 Bootloop, Hang Logo, Full Memory, Forgotten Patterns and other software problems. What should be noted is that please read this article carefully and do not miss a single paragraph for maximum results.

I'd better tell you from here if you're not sure you can do this please leave it to the expert, bring your phone to the hp serviceman in the area near the house.

Because flashing failure can indeed cause hp only stuck in the logo or even Samsung galaxy a7 2018 hp completely dead. And all the risks that come from following these guidelines are entirely your own responsibility.

For that back I emphasize if it is not sure can, please take it to the serviceman!

Okay if you understand let's go to the tutorial.

How to Flash Samsung Galaxy A7 SM-A750GN (2018) Tested

Before flashing please backup your data first if possible. Because after flashing is completed all existing data in internal memory will be lost automatically replaced with a new file system. Read Also : Firmware Flash Samsung Galaxy S20+ SM-G986W

Flashing Materials

PC/laptop

USB cable

Tool Odin

Samsung USB Driver

Stock firmware Samsung Galaxy A7 SM-A750GN

Samsung Galaxy A7 Flashing Tutorial 2018

#1. Please charge your Samsung smartphone until the battery is above 50%. Then please disable the smartphone first by pressing Power until it is completely off.

#2. Well now, extract all the ingredients you just downloaded and will get 5 official files. Please start installing SAMSUNG driver on PC Skip this if it has been done before.

#3. Open Tool Odin. Restart your smartphone by pressing both buttons, Vol (-) and Vol (+) and connect to your PC using a USB cable. If there is a better use of the original USB cable built in hp.

#4. will see that Odin will detect the device with a blue box and appear with the COM port number.

#5. Then, just add each file to Odin according to the column name BL, AP, CP, CSC. Use CSC files if you want to do a clean flash or HOME CSC if you want to save applications and data. Make sure not to check the additional boxes and the must-select are F Reset Time and Auto-Reboot.

#6. Click the Start button, and wait for Odin to flash until a PASS appears in the green box. Once the flash is complete, the smartphone will reboot, and can disconnect the device from the PC.

#7. Until this stage the flashing process is complete. Please complete the hp settings as when the first time the phone was purchased. Like choosing a language and others.

How very easy is not how flash Samsung Galaxy A7 (2018) SM-A750GN Tested. So many articles today, hopefully there are knowledge and benefits obtained from this article. Read Also : Unduh Firmware Samsung Galaxy S20 Ultra SM-G9880

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel