Download Firmware Samsung Galaxy S20+ SM-G9860

Download Firmware Samsung Galaxy S20+ SM-G9860 – In this article I will share the Stock ROM Firmware for Samsung Galaxy S20+ SM-G9860. This firmware can be used to perform Flashing Reinstall. Read Also : Unduh Firmware Samsung Galaxy S20+ SM-G986B

In addition, firmware tock ROM also has several other uses such as Upgrade, Downgrade and also to overcome Bootloop.

Download Samsung Galaxy S20+ SM-G9860
Samsung Galaxy S20+ SM-G9860

For how to Flashing Firmware Samsung Galaxy S20+ SM-G9860 I will write at the bottom of this article.

Please Download The Flash Firmware (Stock ROM) File for Samsung Galaxy S20+ SM-G9860 below. Just select one of the firmware you want to use for Flashing Reinstall.

Choose the latest one if you want to upgrade and choose the oldest one to downgrade. For regular flashing or to overcome Bootloop it is up to you to use which Firmware Stock ROM.

Flash Tools and materials Samsung Galaxy S20+ SM-G9860

Download Samsung USB Driver and install -> Samsung USB Driver (Choose the latest one).

Download Odin Then Extract -> Odin Flasher Tools (Odin3 v3.11.1 for Android 6.0 down & Odin3 v3.12.4 for Android 7.0 and above).

Download and Extract The Firmware File of Samsung Galaxy S20+ SM-G9860. Then you should find 4 / 5 files with.tar.md5.

  • AP_xxx .tar.md5: File System and Recovery
  • BL_xxx .tar.md5: Bootloader File
  • CP_xxx .tar.md5: Modem /Radio
  • CSC_xxx .tar.md5: Country / Region / Operator
  • HOME_CSC_xxx .tar.md5: Country / Region / Operator

Open the Odin App.

Add each File to its own field (Button) in Odin.

Use the CSC_xxx .tar.md5 File if you want to delete all installed data and applications or HOME_CSC_xxx .tar.md5 if you don't want to delete the data and applications.Read Also : Firmware Unduh Samsung Galaxy S20 Ultra SM-G988U

Turn off your Samsung Galaxy S20+ SM-G9860 Phone, wait a while until it is completely turned off, then go into Odin Mode (Download Mode) with the following key combination: POWER + VOLUME DOWN + BIXBY.

If the above means cannot enter Odin Mode, please try some of the options below. Don't forget to turn off the phone first.

Option 1: Hold down THE POWER + VOLUME DOWN + BIXBY BUTTONS at the same time. If a Warning message already appears, Press Volume Up only once to enter Odin Mode

Option 2: Hold down THE POWER + VOLUME DOWN + VOLUME UP BUTTONS at the same time. If a Warning message already appears, Press Volume Up only once to enter Odin Mode

Option 3: Hold DOWN THE POWER + VOLUME DOWN BUTTON + HOME BUTTON at the same time. If a Warning message already appears, Press Volume Up only once to enter Odin Mode

Option 4: Hold DOWN VOLUME BUTTON + BIXBY then connect Phone to PC/Laptop with USB cable

Option 5: Hold DOWN VOLUME + VOLUME UP BUTTON then connect Phone to PC/Laptop with USB cable

Once in Odin Mode, connect your Samsung Galaxy S20+ SM-G9860 phone to your PC, using the built-in OR equivalent USB cable. Odin will detect your Samsung Galaxy S20+ SM-G9860 phone and a BLUE box will appear with the COM port number (ID:COM – 0:[COMx]).

DO NOT check any additional boxes. Leave it as default, where it is checked is F.Reset Time and Auto-Reboot.

Click the Start button to start the Flashing process, wait for the Flash process to finish marked by the green PASS writing appearing in Odin. Read Also : Firmware Samsung M31 SM-M315F Android Q 10

0 Response to "Download Firmware Samsung Galaxy S20+ SM-G9860"

Post a Comment

NO Link Spam

Iklan Atas Artikel

Iklan Tengah Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel