Firmware Stock Rom Samsung Galaxy S20 Ultra SM-G988U1

Romphe.com - Download Firmware (Stock ROM) Flash File Samsung Galaxy S20 Ultra SM-G988U1 – In this article I will share the Firmware (Stock ROM) for Samsung Galaxy S20 Ultra SM-G988U1. This firmware can be used to perform Flashing (Reinstall).

In addition, this Firmware (Stock ROM) also has several other uses such as Upgrade, Downgrade and also to overcome Bootloop. For how to Flashing Firmware Samsung Galaxy S20 Ultra SM-G988U1 I will write at the bottom of this article.

Firmware Stock Rom Samsung Galaxy S20 Ultra SM-G988U1
Samsung Galaxy S20 Ultra SM-G988U1

Please Download the Flash Firmware (Stock ROM) File for Samsung Galaxy S20 Ultra SM-G988U1 below. Just select one of the firmware you want to use for Flashing (Reinstall).

Choose the latest one if you want to upgrade and choose the oldest one to downgrade. For regular flashing or to overcome Bootloop it is up to you to use which Firmware (Stock ROM).

Flashing Materials Samsung Galaxy S20 Ultra

Download Samsung USB Driver and install -> Samsung USB Driver (Choose the latest one).

Download Odin Then Extract -> Odin Flasher Tools (Odin3 v3.11.1 for Android 6.0 down & Odin3 v3.12.4 for Android 7.0 and above).

Download and Extract The Firmware File of Samsung Galaxy S20 Ultra SM-G988U1. Then you should find 4 / 5 files with extansi .tar.md5.

AP_xxx .tar.md5: File System dan Recovery

BL_xxx .tar.md5: Bootloader File

CP_xxx .tar.md5: Modem / Radio

CSC_xxx .tar.md5: Country / Region / Operator

HOME_CSC_xxx .tar.md5: Country / Region / Operator

Open the Odin App.

Add each File to its own field (Button) in Odin.

Use the CSC_xxx .tar.md5 File if you want to delete all installed data and applications or HOME_CSC_xxx .tar.md5 if you don't want to delete the data and applications.

Turn off your Samsung Galaxy S20 Ultra SM-G988U1 Phone, wait a while until it is completely turned off, then enter Odin Mode (Download Mode) with the following key combination: POWER + VOLUME DOWN + BIXBY.

If the above means cannot enter Odin Mode, please try some of the options below. Don't forget to turn off the phone first.

Option 1: Hold down THE POWER + VOLUME DOWN + BIXBY BUTTONS at the same time. If a Warning message already appears, Press Volume Up only once to enter Odin Mode

Option 2: Hold down THE POWER + VOLUME DOWN + VOLUME UP BUTTONS at the same time. If a Warning message already appears, Press Volume Up only once to enter Odin Mode

Option 3: Hold DOWN THE POWER + VOLUME DOWN BUTTON + HOME BUTTON at the same time. If a Warning message already appears, Press Volume Up only once to enter Odin Mode

Option 4: Hold DOWN VOLUME BUTTON + BIXBY then connect Phone to PC/Laptop with USB cable

Option 5: Hold DOWN VOLUME + VOLUME UP BUTTON then connect Phone to PC/Laptop with USB cable

Once in Odin Mode, connect your Samsung Galaxy S20 Ultra SM-G988U1 phone to your PC, using the built-in OR equivalent USB cable. Odin will detect your Samsung Galaxy S20 Ultra SM-G988U1 phone and a BLUE box will appear with the COM port number (ID:COM – 0:[COMx]).

DO NOT check any additional boxes. Leave it as default, where it is checked is F.Reset Time and Auto-Reboot.

Click the Start button to start the Flashing process, wait for the Flash process to finish marked by the green PASS writing appearing in Odin.

Usually when the Flashing Process has been completed, your phone will immediately Restart / Reboot automatically. But if not, please unplug your phone from the USB and turn it on as usual.

If you still do not understand you can read the full tutorial here -> Tutorial Install / Flash Samsung Galaxy Full Pack Firmware.

Tutorial Flash Firmware One Pack (1 File) Samsung Galaxy S20 Ultra SM-G988U1

Download Samsung USB Driver and install -> Samsung USB Driver (Choose the latest one).

Download Odin Then Extract -> Odin Flasher Tools (Odin3 v3.11.1 for Android 6.0 down & Odin3 v3.12.4 for Android 7.0 and above).

Download and Extract The Firmware File of Samsung Galaxy S20 Ultra SM-G988U1 above. Then you should find 1 File with .tar.md5.

Open the Odin App.

Add the .tar.md5 File in the AP/PDA field in the Odin Application.

Turn off your phone, wait a while until it is completely turned off, then enter Odin Mode (Download Mode) with the following key combination: POWER + VOLUME DOWN + BIXBY.

If you still do not understand you can read the full tutorial here -> Tutorial Install / Flash Samsung Galaxy One Pack Firmware.

0 Response to "Firmware Stock Rom Samsung Galaxy S20 Ultra SM-G988U1"

Post a Comment

NO Link Spam

Iklan Atas Artikel

Iklan Tengah Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel