Firmware Samsung M31 SM-M315F Android Q 10 - Firmware or Stock ROM Samsung Galaxy M31 in addition to being able to upgrade the Android OS software, can also solve a variety of minor to severe problems.

For example fix bootloop, Custom Binary Blocked by FRP Samsung, forgot pattern or password, fingerprint and screen insensitive, camera failed, stabilized performance, phone completely dead, unroot, soft/hard brick, remove viruses and so on Firmware Samsung M31 SM-M315F Android Q 10.

Firmware Samsung M31 SM-M315F
Samsung M31 SM-M315F

The Samsung Galaxy M31, which launches with model number SM-M315F/DS, is a mid-range handset officially launched in late February 2020. There are two sectors that are the main advantages, first with a monster battery with a capacity of 6,000 mAh and secondly a quad rear camera with a main lens of 64 megapixels.

Since its launch for the first time, the phone nicknamed "Mega Moster" is run by the Android Q operating system version 10.0 with the interface of One UI 2.0. Well, in connection with this, for those of you who want to flash or reinstall the firmware Samsung Galaxy M31, here's the full tutorial.

Download Firmware Samsung Galaxy M31

  • Phone Samsung Galaxy M31
  • Model SM-M315F
  • Country of Indonesia - XID
  • Android Q 10.0
  • Build October 2020
  • Size 3.78GB

Flash Equipment Firmware Samsung Galaxy M31

There are two applications needed to flash the Galaxy M31 firmware. First samsung USB driver that serves to synchronize HP with PC and second flashtool Odin as a means for flashing process.

How to Flash Firmware Samsung Galaxy M31

1. Extract the firmware/ stock file of Samsung Galaxy M31 ROM first using WinRar or 7-Zip.

2. Disable the HP Galaxy M31. After that boot to Download mode by pressing the button [POWER + VOLUME UP + VOLUME DOWN] simultaneously for approximately 5-10 seconds.

3. Release all three buttons when the screen has displayed the boot logo. Press the volume up button once when it is in the [WARNING] view to enter the main downloading mode menu.

4. Connect your HP Galaxy M31 to your PC using a USB cable and then run the ODIN application. In this case it is best to run run as administrator.

5. Make sure ODIN has detected the device by looking at the text 'Added!!' tab "Log" ODIN or there is a USB port address under [ID:COM].

6. Click the [OPTIONS] tab and then check [AUTO REBOOT] and [F. RESET TIME]. The rest, leave it blank.

7. If the firmware file you downloaded is only 1 FILE, then please click the AP button and select the file.

8. However, if there are 4 firmware files (CSC, BL, AP, CP), then please enter one by one according to the name in the column BL, AP, CP and CSC.

9. When you have, please click the [START] button to start the flashing process and wait for it to finish. If successful, Odin will show a PASS notification!!.

10. As soon as the installation process is complete, the phone itself will restart. But if that is not the case, please press the [POWER + VOLUME DOWN] button and hold until the screen is blank / black. Finished.

Samsung Galaxy M31 Flash Firmware Failed Solution

  • Make sure the USB cable and USB port are not in trouble.
  • Make sure the firmware file is not corrupted or damaged.
  • Run ODIN by Running as administrator.
  • Firmware is appropriate smartphone model.
  • Reinstall Samsung USB Driver, then restart the PC.
  • Update flashtool ODIN to the latest version.

0 Response to "Firmware Samsung M31 SM-M315F Android Q 10"

Post a Comment

NO Link Spam

Iklan Atas Artikel

Iklan Tengah Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel