Flash Firmware Samsung Galaxy S10 Plus Via Odin

Romphe.com - Download Samsung Galaxy S10 Plus smartphones come with a variety of pluses, and are undoubtedly one of Samsung's best lines for the high-end segment. This model is indeed expensive, but the extra features added make the price very comparable.


Samsung Galaxy S10 Plus

The Samsung Galaxy S10 Plus uses the latest Amoled Dynamic panel to make the look more stylish. In addition to its relatively large screen size, the S10 Plus also features two front cameras for selfie purposes and a large reliable battery capacity Download Samsung Galaxy S10E Firmware XID Indonesia.

Many consider the Samsung Galaxy S10 Plus to be the most elegant smartphone today for the big screen category. Not only does it look special, but the S10 Plus is also faster than the previous version. Like wanting a flagship with the best display, the Samsung Galaxy S10 Plus is the answer.

Specifications :

Samsung Galaxy S10 Plus
Processor: Exynos 9820
RAM: 8GB, 12GB
Screen: 6.4 inches
Resolution: 3040 x 1440
Front camera: 10MP f/1.9, 8MP f/2.2
Rear camera: 12MP f/1.5, 12MP f/2.4, 16MP f/2.2
Storage: 128GB, 512GB, 1TB
Battery: 4100mAh
Android version: 9.0

Other tools Samsung Galaxy S10 Plus




Steps Flash Samsung Galaxy S10 Plus

#1. Prepare the flash material in advance, three files do not miss see the version when downloading the file do not get the firmware wrong so as not to fail when the flash key only compares SM, just like the back of it.

#2. Do not separate the files that have been taken into one folder, because it is easiest and easier to run flash, the proof is I have done so as not to mix with firmware files when the computer is used to flash.

#3. Ektrak all files except USB Driver can directly install, how to install open rar or zip click open then click OK automatically installed follow the instructions already on the computer would be nice to use a Windows 7 computer.

#4. It's just that USB does not need to be installed no problem, different from the two Odin files and the firmware must be open adaan do not until it is still in the form of rar, because until whenever Odin can not reach should the state already in the ektrak.

#5. Finish ektrak open Odin using my way, can use run as administrator wait until it opens, then turn off the smartphone until completely off wait for there to be vibration when turning off Samsung S10+.

#6. Go into grab mode by pressing the power button, Bixby, and volume down then continue the entry mode process press the volume up button, it is a bit rebet if first learn flash, same as I just learned is very swirling.

#7. Click AP/PDA in Odin enter the firmware that has been taken that makes one file like my saranya, just enter it and loading wait until it enters before the flash process is done.

#8. See Odin while connecting your Samsung USB using a view data cable and note there is an ID:COM reading, the sign is that the flash is ready to start.

#9. Click start to start flashing, just wait until the smartphone reboots and there is a reading pass with the smartphone sign already successfully in the flash and see how it looks now if there is a difference. 

Concluding

If the smartphone S10+ can not be flash already I said pay attention to the appropriate firmware version or not and mmc smarthone is still normal or not because many problems that can cause the flash not to run successfully in the result of the firmware does not match.

0 Response to "Flash Firmware Samsung Galaxy S10 Plus Via Odin"

Post a Comment

NO Link Spam

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel