Firmware Flash Samsung Galaxy S20 Ultra

Romphe.com - Samsung Galaxy S20 Ultra officially enters the Indonesian market on Wednesday, February 12, 2020. It offers four cameras that are pinned on the back of the phone.

Firmware Flash Samsung Galaxy S20 Ultra, Flashing is commonly used to solve problems on mobile phones such as Bootlop or Stuck logo, restart itself, hard factory reset, forgot pattern, pin, and password, application error, Root failed, and its more worse error or totally dead Firmware Flash Samsung Galaxy S20 Ultra.

Samsung Galaxy S20 Ultra

These three cameras have a resolution of 108 MP as the main camera, 48 MP telephoto lens and
12 MP Ultrawide as well as 0.3 MP camera, TOF 3D, F/1.0, (depth), while on the front of the 40 MP camera perched in the punch-hole module.

However, before we start to the Flashing process. It's a good idea to first download the materials to smoothen this flash stage as follows.


Samsung Galaxy S20 Ultra SM-G988B


Mobile : Galaxy S20 Ultra
Model : SM-G988B
System Version : Android 10 Q
Baseband : XSG G988BXXU3ATFG
Download (AFH)
Download


Samsung Galaxy S20 Ultra SM-G988U1


Mobile : Galaxy S20 Ultra
Model : SM-G988U1
System Version : Android 10 Q
Baseband : USC G988U1UES1ATD1
Download (AFH)
Download


Samsung Galaxy S20 Ultra SM-G9880


Mobile : Galaxy S20 Ultra
Model : SM-G9880
System Version : Android 10 Q
Baseband : CHC G9880ZCU2ATFF
Download (AFH)
Download


Samsung Galaxy S20 Ultra SM-G988U


Mobile : Galaxy S20 Ultra
Model : SM-G988U
System Version : Android 10 Q
Baseband : TMB G988USQU1ATCU
Download (AFH)
Download


Samsung Galaxy S20 Ultra SM-G988N


Mobile : Galaxy S20 Ultra
Model : SM-G988N
System Version : Android 10 Q
Baseband : SKC G988NKSU1ATCT
Download (AFH)
Download

Other tools


Steps Flash Samsung Galaxy S20 Ultra

#1. Extract all downloaded ingredients.

#2. Install the Samsung USB Driver on your computer.

#3. Turn off the phone > turn on the phone by pressing power button + Volume down until the "Downloading Mode".

#4. If you have already entered the downloading mode and press Volume up once > connect your phone using a USB cable to your computer > Then open the Odin tool.

#5. Make sure that on the top left is blue. It means your phone reads on Odin tab AP then find the firmware you have extracted.

#6. If there is a file 4/5 the results of the contains then input BL files for Bootloader, AP for AP, CSC for CSC and CP for CP.

#7. Wait for the firmware to enter in Odin depending on the PC specifications used > Press Start

#8. Wait for the flash running time flashing depends on the size of the firmware in Flash and the specifications of your computer.

#9. If flashing success will appear a green sign in the top left corner with the caption "PASS!"
Finished.

0 Response to "Firmware Flash Samsung Galaxy S20 Ultra"

Post a Comment

NO Link Spam

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel