Download Firmware Update Samsung Galaxy Xcover 4s

Romphe.com - Samsung Galaxy Xcover 4s appears to the surface with a rather thick bezel, inversely proportional to the current mobile phone using a as thin bezel as possible. Not without cause, because the Samsung Galaxy Xcover 4s is projected as the most powerful phone.

Download Firmware Update Samsung Galaxy Xcover 4s, One of the real advantages of the Samsung Galaxy Xcover 4s is that of the rubber material in the bezel to protect against impact, even able to withstand damage when falling from a height of 120 cm. Another technology that is pinned is anti-dust and waterproof IP68 Firmware Update Samsung Galaxy Xcover 4s.

Samsung Galaxy Xcover 4s
Samsung Galaxy Xcover 4s

There is an additional micro SD slot if you need more storage space. The side of the Xcover button can be used to quickly access the app. Interestingly, the battery of the Samsung Galaxy Xcover 4s can be removed and replaced.


Samsung Galaxy Xcover 4s



Specifications:


  • Processor: Exynos 7885
  • RAM: 3GB
  • Screen: 5 inches
  • Resolution: 720 x 1280
  • Front camera: 5MP F/2.2
  • Rear camera: 16MP F/1.7
  • Storage: 32GB
  • Battery: 2800mAh
  • Android version: 9.0

Samsung Galaxy Xcover 4s SM-G398FN


Mobile : Galaxy Xcover 4s
Model : SM-G398FN
System Version : Android 9 Pie
Baseband : XSG G398FNXXS1ASI1
Download (A F H)
Download (AFH)
Download

Mobile : Galaxy Xcover 4s
Model : SM-G398FN
System Version : Android 10 Q
Baseband : XSG G398FNXXS6BTG1
Download (A F H)
Download (AFH)
Download


Other tools Galaxy Xcover 4s



Steps Flash Samsung Galaxy Xcover 4s


#1. Extract all the firmware, Odin, Driver make it in 1 folder to make it easier.

#2. Install the driver and open Odin software.

#3. In a dead state, press and hold the button (volume down + Home + power) on the smartphone that you want to flashing. Then click "Continue" Press the up button for the downloading process.

#4. Connect the Samsung Galaxy Xcover 4 SM-G390Y with the Origal cable to your PC/Laptop.

#5. Make sure your phone is well connected to the computer, to see the  "Log " tab of ODIN. If you have the text ' Added!! ' Or there is a USB port address under [ID: COM], then both of them are well connected. But If there is no, please move the USB cable to another port or replace the USB cable.

#6. If successful, your smartphone will be detected by Odin. If it is not detected, try to reconfirm the installed USB drivers and make it easier to connect the Internet connection twitch.

#7. Extract the firmware that you downloaded earlier. Be sure to fit the type of smartphone you have.

#8. Uncheck "Re-partion", then click "Start" on the display, and the flashing process will begin.
If it succeeds, it will appear "PASS", but if it fails it will appear "Failed". If it fails, try redownload the Firmware file, because it is possible that the previous firmware file was corrupt.

#9. Once successful, your smartphone will reboot by itself. Just wait until it lights up again perfectly.

#10. If still having Bootloop enter the recovery mode Volume Up + Home + Power press simultaneously and select "Wipe Data/Factory reset" by using Volume for navigation and Power to confirm.

So how to flashing Samsung Galaxy Xcover 4 SM-G390Y. If it still doesn't work, chances are there are corrupt files or smartphones not connected to the PC perfectly. Revisit and re-download all files if needed to avoid corrupt files.

0 Response to "Download Firmware Update Samsung Galaxy Xcover 4s"

Post a Comment

NO Link Spam

Iklan Atas Artikel

Iklan Tengah Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel