Firmware Download Flash Samsung Galaxy Tab 3 Lite VE SM-T113

Romphe.com - Samsung Galaxy Tab 3 Lite VE SM-T113 Before learning the flashing let's see the specifications on the Samsung, With the development of Samsung now comes with a good design and midifiication that can make you happy in wearing Firmware Samsung Galaxy Tab 3 Lite SME-T113 VE is Samsung thin enough in the thickness of its weight only about 310 grams is very light when placed in the bag, to facilitate the interface on samsung is good because the size is only 7 inches with a resolution of 600 x 10244 pixels with 170 ppi density. 

Samsung has OS android kitakak 4.4.4 processor in use Spreadtrum SC8830, clock speed reaches 1.3 GHz. Ram on Samsung Galaxy Tab 3 Lite VE SM-T113 zoom 1 GB is enough to accommodate the application, so our first specs go on flash Firmware Download Flash Samsung Galaxy Tab 3 Lite VE SM-T113.

Firmware Download Flash Samsung Galaxy Tab 3 Lite VE SM-T113
Firmware Download Flash Samsung Galaxy Tab 3 Lite VE SM-T113



NOTE !!! : I am not responsible if there is damage at the time of flashing then of that please be careful for his attention thanks.

Flash Tools Samsung Galaxy Tab 3 Lite VE SM-T113



Steps Flash Samsung Galaxy Tab 3 Lite VE SM-T113


#1. Things that should not be forgotten is extract all the files that have been downloaded because it is still in the form of zip to live extract all is wrong because in case already in extract easy to run the application.

#2. Open Odin and install Samsung Driver on your PC until finished if it can restart your computer.

#3. Live step Next turn off the Samsung Galaxy Tab 3 Lite VE SM-T113 and turn it back on by pressing the volume down key + home + power simultaneously and wait for it to vibrate into download mode and press the volume up button then it goes into download mode.

#4. Connect your Samsung Galaxy Tab 3 Lite VE SM-T113 to your PC using the USB cable so it automatically detected ID: COM on Odin turns on the phone and your PC is connected with Odin.

#5. Lost click PDA / AP on Odin and navigate the file of your firmware extract result that is formatted xxx.tar.md5 where you put it there you can enter on odin wait until the loading process is complete.

#6. Live directly click START and wait until the process is complete until there is a reading pass.

Related Posts

Subscribe Our Newsletter