Firmware Download Sony SmartWatch 3 SWR50

Romphe.comSony SmartWatch 3 SWR50 smartphone this one is a smartphone in the form of a watch that distinguishes it can only be used to send messages and pick up the phone like other smartphones for you who have a smartphone like this then it could be in flash by using flash tool like other sony then from do not worry if your smartphone bootlop or hank logo can still have a normal chance like the original just just below do not forget the battery above 50% so flash to be good without the lack of battery, for sony smartphone I've been looking for format 3 fingers was not able to the reset is the last solution if still can not by flashing can you download all the files below good luck.

Firmware Download Sony SmartWatch 3 SWR50

NOTE !!! : I am not responsible if there is damage at the time of flashing then of that please be careful for his attention thanks.

Link Download

Steps of Flash Sony SmartWatch 3 SWR50

#1. Things that should not be forgotten is extract all the files that have been downloaded because it is still in the form of winrar live extract all is wrong because if it is in the extract easy to run the application.

#2. Open Flash tool and install Driver after you have finished installing Flash tool on your PC until finished if it can restart your computer or not.

please double click the flashtool-drivers.exe file in the folder C: \ Flash tool \ drivers. examples of the appearance as follows:

Firmware Download Sony SmartWatch 3 SWR50

Install Driver As per your Smartphone is usually like that :

Firmware Download Sony SmartWatch 3 SWR50

After finished install flash tool and the driver is installed, we just go to the guide flashing Sony SmartWatch 3 SWR50.

#3. All you extract especially firmware then you will get file with extension .ftf. After that, please place the file in the folder C: \ Flashtool \ firmwares.

#4. Open Flash tool image example like this.

Firmware Download Sony SmartWatch 3 SWR50

#5. if you see the lightning logo just click located in the top right corner, under the File menu then a prompt will appear to select the mode. For this time please select Flash mode.

Firmware Download Sony SmartWatch 3 SWR50

#6. After you click OK a flash mode window will pop up. In the window, please select the firmware you want to flash. Check on Wipe data, wipe cache, and no final verification as shown below :

Firmware Download Sony SmartWatch 3 SWR50

#7. When finished all just click the OK button, then flash tool will loading and prepare the flashing process. then a prompt will appear asking you to plug your USB cable along with smartphone in flash mode.

#8. Press Volume Down or Back Arrow on Smartphone then, Connect your smartphone to the USB cable with to die and die then loading briefly and USB well detected then flashing process usually run well and reach 100% mean have success.

Iklan Atas Artikel

Iklan Tengah Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel