Firmware Download Rom Samsung Galaxy S6 Edge+ SM-G928F

Romphe || Samsung Galaxy S6 Edge + SM-G928F will discuss about Samsung Galaxy S6 Edge + SM-G928F 32GB is a good Android phone with 2.1Ghz Octa-Core processor that allows heavy game and application to be light due to high processor in mix with RAM capacity big. 

With a single SIM card slot, the Samsung Galaxy S6 Edge + SM-G928F 32GB allows downloads of up to 300 Mbps for internet browsing, but also depends on your local network. The great connectivity of this device includes Bluetooth version 4.2 with A2DP, WiFi 802.11 a / b / g / n / ac and allows connections to other devices to be faster and better, Including battery, Samsung Galaxy S6 Edge + SMGB-G928F 32GB phone weighs 153 gram and this is a very thin device, only 6.9 mm, for that will give tutorial for flashing or update Samsung Galaxy S6 Edge + SM-G928F from Lollipop 5.1.1 to Marshmallow 6.0.1 up to Update Nougat 7.0.


Samsung Galaxy S6 Edge+ SM-G928F Nougat 7.0 Stock ROM

NOTE !!! : I am not responsible if there is damage at the time of flashing then of that please be careful for his attention thanks.

Flash Tools

USB Driver
Odin Samsung
Firmware


Steps Flash

#1. Things that should not be forgotten is extract all the files that have been downloaded because it is still in the form of zip to live extract all is wrong because already in extract easy to run the application.

#2. Open Odin and install Samsung Driver on your PC until finished if it can restart your computer.

#3. Live step Next turn off the Samsung Galaxy S6 Edge+ SM-G928F and turn it back on by pressing the volume down key + home + power simultaneously and wait for it to vibrate into download mode and press the volume up button then it goes into download mode.

#4. Connect your Samsung Galaxy S6 Edge+ SM-G928F to your Pc using the USB cable so it automatically detected ID: COM on Odin turns on the phone and your PC is connected with Odin.

#5. Lost click PDA / AP on Odin and navigate the file of your firmware extract result that is formatted xxx.tar.md5 where you put it there you can enter on odin wait until the loading process is complete.

#6. Live directly click START and wait until the process is complete until there is a reading PASS.

Related Posts

Subscribe Our Newsletter