Firmware Download Samsung Galaxy J7 SM-J700M

Romphe || Samsung Galaxy J7 SM-J700M If you have a Galaxy J7 that is experiencing damage to the software and you want to fix it because you do not know how you want to fix Galaxy J7 already owned then you do not wait let us fix it, just follow the step by step guides are safe this. You can also repair the hank logo with this guide. This article will help you how to flashing the Samsung Galaxy J7 that is experiencing hank logo. 

Firmware Download Samsung Galaxy J7 SM-J700M

This guide also helps you get back to stock ROM At the original Samsung Galaxy J7, the Samsung Galaxy J7 is a mid-range Android smartphone running on android 5.1 directly to Lollipop, and powered by Quad-core 1 / 1.4 GHz Cortex-A53CPU chipset, Qualcomm Snapdragon 615 or Exynos 7580, Adreno 405 or Mali-T720MP2 GPU, plus 1.5GB of RAM and 16 GB of internal storage memory for flashing way can use the way below.

Firmware Download Samsung Galaxy J7 SM-J700M

Firmware Download Samsung Galaxy J7 SM-J700M

NOTE !!! : I am not responsible if there is damage at the time of flashing then of that please be careful for his attention thanks.

Firmware Download Samsung Galaxy J7 SM-J700M

Flash Tools

USB Driver
Odin Samsung

Steps Flash

#1. Things that should not be forgotten is extract all the files that have been downloaded because it is still in the form of zip to live extract all is wrong because already in extract easy to run the application.

#2. Open Odin and install Samsung Driver on your PC until finished if it can restart your computer.

#3. Live step Next turn off the Samsung Galaxy J7 SM-J700M and turn it back on by pressing the volume down key + home + power simultaneously and wait for it to vibrate into download mode and press the volume up button then it goes into download mode.

#4. Connect your Samsung Galaxy J7 SM-J700M to your PC using the USB cable so it automatically detected ID: COM on Odin turns on the phone and your PC is connected with Odin.

#5. Lost click PDA / AP on Odin and navigate the file of your firmware extract result that is formatted xxx.tar.md5 where you put it there you can enter on odin wait until the loading process is complete.

#6. Live directly click START and wait until the process is complete until there is a reading PASS.

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel