Download Firmware Samsung Galaxy S3 LTE (ATT) SGH-I747

Romphe || Samsung Galaxy S3 LTE (ATT) SGH-I747 is Samsung output June 2012 but for release in July 2012 brings GSM 2G network technology GSM 850/900/1800/1900 / HSPA 3G bands HSDPA 850/1900/2100 / LTE 4G bands LTE band 4 (1700/2100), 17 (700) HSPA Speed 21.1 / 5.76 Mbps, LTE Cat3 100/50 Mbps when we measure the name of the speed must be lost to the 4G network because it is clear comparison above, 4.8 inch screen size 720 x 1280 pixels, 2 GB RAM and 16 GB internal memory OS android System Version: Ice Cream Sandwich 4.0.4 can you update to System Version: Jelly Bean 4.3 below.


Download Firmware Samsung Galaxy S3 LTE (ATT) SGH-I747

NOTE !!! : I am not responsible if there is damage at the time of flashing then of that please be careful for his attention thanks.

Flash Tools




Steps Flash

#1. Things that should not be forgotten is extrac tall the files that have been downloaded because it is still in the form of zip to live extract all is wrong because already in extract easy to run the application.

#2. Open Odin and install Samsung Driver on your PC until finished if it can restart your computer.

#3. Live step Next turn off the Samsung Galaxy S3 LTE (ATT) SGH-I747 and turn it back on by pressing the volume down key + home + power simultaneously and wait for it to vibrate into download mode and press the volume up button then it goes into download mode.

#4. Connect your Samsung Galaxy S3 LTE (ATT) SGH-I747 to your PC using the USB cable so it automatically detected ID: COM on Odin turns on the phone and your PC is connected with Odin.

#5. Lost click PDA / AP on Odin and navigate the file of your firmware extract result that is formatted xxx.tar.md5 where you put it there you can enter on odin wait until the loading process is complete.

#6. Live directly click START and wait until the process is complete until there is a reading PASS.

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel