Download Firmware Samsung Galaxy Note 10.1 (LTE + WiFi) GT-N8020

Romphe || Samsung Galaxy Note 10.1 (LTE + WiFi) The GT-N8020 has suffered a lot of damage to the smartphone in causing one to cause damage due to a download error in the firmware or the download file is incomplete, application error, touch-sensitive screen, internal memory exposed by virus, load the boot loop, until the total death can be detected in the firmware update then you need to know not to incorrectly insert the firmware in Odin. For Samsung drivers on the computer must be installed first so that the drever smartphone can be read, another way you can also flashing RESET Galaxy Note 10.1 LTE WiFi GT-N8020 by pressing three key combinations. 

When the device is off position press and hold Vol up + Power until the android robot image. So do wipe user data, but sometimes this is not enough to help the HH needed Flashing Update or downgrade to a smaller one.


Download Firmware Samsung Galaxy Note 10.1 (LTE + WiFi) GT-N8020

NOTE !!! : I am not responsible if there is damage at the time of flashing then of that please be careful for his attention thanks.


Flash Tools




Steps Flash

#1. Things that should not be forgotten is extract all the files that have been downloaded because it is still in the form of zip to live extract all is wrong because already in extract easy to run the application.

#2. Open Odin and install Samsung Driver on your PC until finished if it can restart your computer.

#3. Live step Next turn off the Samsung Galaxy Note 10.1 (LTE + WiFi) GT-N8020 and turn it back on by pressing the volume down key + home + power simultaneously and wait for it to vibrate into download mode and press the volume up button then it goes into download mode.

#4. Connect your Samsung Galaxy Note 10.1 (LTE + WiFi) GT-N8020 to your PC using the USB cable so it automatically detected ID: COM on Odin turns on the phone and your PC is connected with Odin.

#5. Lost click PDA / AP on Odin and navigate the file of your firmware extract result that is formatted xxx.tar.md5 where you put it there you can enter on odin wait until the loading process is complete.

#6. Live directly click START and wait until the process is complete until there is a reading PASS.

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel