Download Firmware Samsung Galaxy Note 4 (Exynos) SM-N910C

Romphe || Samsung Galaxy Note 4 (Exynos) SM-N910C hi friends meet again with Rom Gsm which in this way is still in the process of flashing which we will learn flashing on Samsung Galaxy Note 4 (Exynos) SM-N910C before that we will measure the type with the firmware is useful so that no one in choosing the firmware, Samsung Galaxy Note 4 (Exynos) SM-N910C with carry GSM HSPA and LTE which samsung is already support in cities you adjust, Smartphone from Samsung is a powerful multitasking tool. 

The device features a 5.7-inch AMOLED Super display with a quad HD resolution of 2560 x 1440. For a powerful process, the smartphone is powered by an Exynos 5433 octa-core Samsung chipset that consists of quad-core processors 1.3 GHz and 1.9 GHz, 3 GB RAM and 32GB of internal memory suitable for users of you, OS android System Version: KitKat 4.4.4 update to System Version: Marshmallow 6.0.1 to download the firmware in the still small versions.

Download Firmware Samsung Galaxy Note 4 (Exynos) SM-N910C

NOTE !!! : I am not responsible if there is damage at the time of flashing then of that please be careful for his attention thanks.

Flash Tools

USB Driver
Odin Samsung


Steps Flash

#1. Things that should not be forgotten is extract all the files that have been downloaded because it is still in the form of zip to live extract all is wrong because already in extract easy to run the application.

#2. Open Odin and install Samsung Driver on your PC until finished if it can restart your computer.

#3. Live step Next turn off the Samsung Galaxy Note 4 (Exynos) SM-N910C and turn it back on by pressing the volume down key + home + power simultaneously and wait for it to vibrate into download mode and press the volume up button then it goes into download mode.

#4. Connect your Samsung Galaxy Note 4 (Exynos) SM-N910C to your PC using the USB cable so it automatically detected ID: COM on Odin turns on the phone and your PC is connected with Odin.

#5. Lost click PDA / AP on Odin and navigate the file of your firmware extract result that is formatted xxx.tar.md5 where you put it there you can enter on odin wait until the loading process is complete.

#6. Live directly click START and wait until the process is complete until there is a reading PASS.

Related Posts

Subscribe Our Newsletter