Download Firmware Rom Samsung Galaxy A7 SM-A700FD

Romphe || Samsung Galaxy A7 SM-A700FD various ways to flashing This method can be used for flash tools that are also available here, and it is important to install a driver phone on your computer, you can not flash or upgrade if not installed on the computer / Laptop must be installed first. Rom Gsm shared the way of flashing in this post, here everything is connected to each other tested and works well in just one trial, if you want to fix the device can try to fix it by having to charge the battery with a charger of 75% to run properly. We recommend that you backup data like other important files between your contacts, important messages, emails or other important things that seem to be a backup on your device. 

This backup can be done on other devices. We must backup because after the format of the device all the data is gone and can not recover unless it has back up, for backup on other device you can use other external device like hard drive, Memory Card / SD Card or other suitable device and become requirement you just go ahead.

Download Firmware Samsung Galaxy A7 SM-A700FD

NOTE !!! : I am not responsible if there is damage at the time of flashing then of that please be careful for his attention thanks.


Flash Tools



Steps Flash

#1. Things that should not be forgotten is extract all the files that have been downloaded because it is still in the form of zip to live extract all is wrong because already in extract easy to run the application.

#2. Open Odin and install Samsung Driver on your PC until finished if it can restart your computer.

#3. Live step Next turn off the Samsung Galaxy A7 SM-A700FD and turn it back on by pressing the volume down key + home + power simultaneously and wait for it to vibrate into download mode and press the volume up button then it goes into download mode.

#4. Connect your Samsung Galaxy A7 SM-A700FD to your PC using the USB cable so it automatically detected ID: COM on Odin turns on the phone and your PC is connected with Odin.

#5. Lost click PDA / AP on Odin and navigate the file of your firmware extract result that is formatted xxx.tar.md5 where you put it there you can enter on odin wait until the loading process is complete.

#6. Live directly click START and wait until the process is complete until there is a reading PASS.

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel