Firmware Download Rom Samsung Galaxy Y GT-S5360

Romphe || Samsung Galaxy Y Gt-S5360 You need to know in flashing Galaxy Y is not difficult what you need is patience in solving problems on smartphone or other smartphone, because all the problems there must be a way out on this occasion I will give a tutorial in flashing that you do not know if you can try it if there is a smartphone that needs flashing then you can try it the longest it may just take 20 minutes but if it already has the tools - tools in flashing.

Samsung Galaxy Y GT-S5360 Software

A little understanding, flashing is a technique of reinstalling the operating system that is useful to repair software that is damaged in it.

Why should flashing ...? Because the flashing is caused Hp already feels slow and may have been exposed to the virus. Usually flashing is done because samsung already has hank logo or other problems.

You need to know before re-install the backup data all because it will be lost can not be restored again data such as contacts and will be lost stored in internal memory. And also programs and applications will also go missing.

NOTE : I am not responsible if there is damage to your smartphone because of damage on your own behalf for his attention thanks.

Flash Tools


Steps Flash

#1. extract all the ingredients that have been downloaded save in one folder so as not confused later, install USB driver to complete.

#2. Do not forget the battery above 50% or 70% because so as not to die during the Reinstall / Flashing Samsung Galaxy Young GT-S5360.

#3. Turn off Samsung galaxy young until it's completely dead and the screen is black or open the battery and plug it back in order to really die.

#4. If you have directly press the Volume Down / down button + Home + Power Button simultaneously to immediately start the Install / Flashing Samsung Galaxy Young GT-S5360.

#5. Wait until the yellow triangle appears and just click the volume up / UP.

#6. Open Odin already extracted earlier, make sure Samsung has detected in odin there is read ID: com usually.

#7. If it is live we enter enter the firmware file that has been extracted. Click on the PDA button directly search and select the file that has become a folder of the extract results was named PDA_S5360_DXMJ1.tar.md5. Then click PHONE directly search and select the extrack file was named MODEM_S5360_DXMI1.tar.md5. For the last click the CSC button immediately locate and select the extract file was named CSC_S5360_OLBMJ1.tar.md5. For "BOOTLOADER" and PIT "leave it alone because it has no effect.

  • Do it like this in Odin
  • PDA = PDA_S5360_DXMJ1.tar.md5
  • PHONE = MODEM_S5360_DXMI1.tar.md5
  • CSC = CSC_S5360_OLBMJ1.tar.md5

#8. If all the files have been entered, just enter the smartphone directly click the "start" button to start the Install / Flashing Samsung Galaxy Young GT-S5360 and wait for the process of reinstall / Flashing Samsung Galaxy Young GT-S5360 completed. When finished it will appear "PASS" and in the green block which means the flash is finished and the smartphone will reboot itself and will live.

A few tutorials from me more apologize if there is a mistake on the writing I apologize as much as gratitude.

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel